CUPROUS CYANIDE

PRODUCT IDENTIFICATION

CAS NO. 544-92-3 (Cuprous cyanide)
14763-77-0 (
Copper Cyanide)

CUPROUS CYANIDE

EINECS NO. 208-883-6 (Cuprous cyanide
238-826-0 (
Copper Cyanide)
FORMULA CNCu
MOL WT. 89.56

H.S. CODE

 
TOXICITY Oral rat LD50: 1265 mg/kg
SYNONYMS Cianuro de cobre; Kupfercyanid; Cyanure de cuivre;
SMILES  

CLASSIFICATION

 

PHYSICAL AND CHEMICAL PROPERTIES

PHYSICAL STATE yellow to green powder
MELTING POINT

473 C

BOILING POINT Decomposes
SPECIFIC GRAVITY 2.92
SOLUBILITY Insoluble (Soluble in nitric acid)
pH  
VAPOR DENSITY  

AUTOIGNITION

 

NFPA RATINGS

Health: 2; Flammability: 0; Reactivity: 0

REFRACTIVE INDEX

 

FLASH POINT  
STABILITY Stable under ordinary conditions

GENERAL DESCRIPTION & APPLICATIONS

Hydrogen cyanide is a highly toxic clear to pale blue liquid or gas with the odor of bitter almonds. It melts at -14 C and boils at 25.6 C. It is miscible in water or ethanol and is slightly soluble in ether. Its water solution, called hydrocyanic acid, is a weak acid. Hydrogen cyanide is mainly obtained by the reaction of ammonia with carbon monoxide (Andrussow process) or with natural gas (methane) in the presence of rhodium/platinum catalyst at approximately 1100 C. Very short contact time (milliseconds) is required to obtain the optimum yield and consequently a high operating temperature is required to reach equilibrium. It can be prepared also by the reaction of cyanide salts, e.g., calcium cyanide, with a strong acid (sulfuric acid). Hydrogen cyanide is obtained as a by-product from acrylonitrile production. But the portion is small. It is used as a fumigant in agriculture. The principal use of hydrogen cyanide is in the manufacturing of acrylates, synthetic fibers (as a starting material for nylon 66), plastics and cyanide salts, especially sodium cyanide to extract gold from ore. It is used in the manufacturing of organic chemicals; acrylonitrile, metal polishes, dyes, rodenticides, pesticides, synthetic fibers, plastics, and electroplating solutions. Cyanide salts are utilized in metal cleaning, tempering of steel, gardening, in ore-extracting processes, dyeing, printing and photography, electroplating (gold and silver bath), various organic reactions (Organic cyanide and nitrile synthesis) manufacture of adiponitril for nylon production.  Also used for production of monomers (e.g. acrylates) as well as in fumigants and pesticides. Copper compounds form a protective barrier on the plant surface and thereby prevent fungi from entering the plant host. The fungicidal effect of copper compounds as non-systemic fungicides are such as bordeaux mixture, cupric hydroxide, copper arsenate, copper carbonate, cuprous oxide,  copper-8-quinolinolate, copper oleate, copper sulfate, or copper oxychloride. Another important biological application of copper compounds, such as copper sulfide is as an antifouling agent in paints.
SALES SPECIFICATION

APPEARANCE

yellow to green powder

ASSAY

98.0% min

Cu CONTENT

68.5% min

WATER

0.5% max

INSOLUBLES

0.1% max (in nitric acid)

Fe

0.03% max

HEAVY METALS

0.005% max

TRANSPORTATION
PACKING 20kgs in drum
HAZARD CLASS 6.1 (Packing Group: I)
UN NO. 1587
OTHER INFORMATION
Hazard Symbols: T+, Risk Phrases: 26/27/28-32, Safety Phrases: 1/2-7-24/25-26-28-29-45
GENERAL DESCRIPTION OF CYANIDE PROCESS
Cyanide process, also known as cyanidation, is the most widely used process for extracting gold and silver from ores. The ores are powdered grounds and can be concentrated by flotation. It is then mixed with dilute solutions of sodium (or potassium or calcium) cyanide while air is bubbled through it to form the soluble complex ion, Au(CN)2-1. The precious metals are precipitated from solution by zinc. The precipitates are smelted to remove the zinc and treated with nitric acid to dissolve the silver.